mixxt

Sign up here for free!

Welcome to mixxt!

I have a Hyster 50 forklift that is leaking oil for the Hydraulic

bnbcbihds

I have a Hyster 50 forklift that is leaking oil for the Hydraulic

What your are seeing is indeed a spanner nut. The nut should be bottomed out in the bore of the cylinder. This nut contains packing that seals the shaft of the ram. most cylinders where the nut screws into the bore are Wholesale Nike NFL Jerseys non adjustable. Cylinders that have a cap that screws over can sometimes be adjusted for leakage. Repacking a cylinder is not a hard task if you wish to tackle it. A packing kit can be obtained from your dealer rather inexpensively. Ask for a parts break down illustration.To repack the cylinder simply remove it, put it in a vise or clamp to a sturdy bench and drain the oil. Remove the spanner nut, you can use a punch if no wrench is available. Remove the ram and it will have a piston on the end. Inventory the Nike NFL Jerseys Cheap parts you have make sure you have them all. Then replace the packing rings one at a time being careful not to install them with a twist. You can warm them with a heat gun or hair dryer to make them more plyable, careful wholesale jerseys not to get them too hot you should be able to handle them without burning your fingers. The internal packing rings on the spanner nut can be installed by shaping them in your hands into a "U" shape and set them in the groove cold, then roll a round bar like a 1/2" inch extension in them to seat fully. You can clean the ram shaft lightly with a scotch brite pad if needed. If it is heavily scratched it probably will not reseal. If all is well so far clean out the bore, lube the rings with white grease such as lubriplate 105 and slip it all back together, being careful not to cut any rings. Reinstall the ram and test.If you need more help just repost. If your are satisfied with this answer please push the accept button .I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. , and be sure that I'll be back whenever I need a question answered in a hurry.Stephanie PElm City, NCused your service this weekend with "Trecers" help. thank you ,thank you, nfl jerseys china thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i willrecommend you and use you in the future.David L.Richmond, TX9 dollars, 2 hours of my time, and I drove wholesale nfl jerseys away. Your diagnosis was right on the mark. Thank you so much.Lurch. Thank you very much.Thank you Geordie, I will not hesitate to contact justanswer in the future!ton, Wholesale Jerseys WVAnother great insight to what may be the problem. I willWonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

CommentsComments

No comments yet

Sign in here

Not a member of this network?

Alternative logins

You can use an account of a third party.

About this blog

bnbcbihds

About the author

bnbcbihds.bnbcbihds
bnbcbihds.bnbcbihds
  • Member since: 29/12/2014
  • Posts written: 6
  • Received comments: 0
  • Comments written: 0
  • Latest post: 29/12/2014

Recent blog posts

Network details

  • Search for:

  • Network name

    game mmo blog
    come on

  • Your host is

    Admin

  • Created on

    22/05/2014

  • Members

    285

  • Language

    English